Underwater Cutting System | Petrogen Cutting Systems

The Underwater Cutting System allows operators to cut steel at depths down to and beyond 150 feet. This system provides a safe and reliable means for cutting up to 8 in thick steel underwater without the expense of costly burning rods. The United States Navy and United States Coast Guard extensively tested our underwater cutting unit and approved it for use in all shipboard and drill rig operations.

Cutting Tip Size 1:
Cutting Tip Size 3:
Oxygen Backflash Arrester:
Standard Parts Kit:
Standard Tool Kit:
Spark Striker:
50ft Gasoline Hose Assembly:
50ft Oxygen Hose Assembly:
Cutting Tip Size 5:
Cutting Tip Size 7:
2 High Heat Cutting Tips Size 2:
2 High Heat Cutting Tips Size 3:
High Pressure Oygen Valve/ External O-Ring/ Small End:
High Pressure Oxygen Valve, Internal O-Ring:
Lever:
Oxygen Hose Connector:
Gasoline Hose Connector:
O-Ring, Large End Of Mixer:
Tip Nut:
Oxygen Hose Coupler:
Packing Nut Wrench:
Tip Reamer:
Tip Brush:
Jack Screw:
Allen Wrench:
Underwater Shroud Heat Sink:
Tool Box:
Underwater Shroud Wrench:
15 Inch, 90 Degree Underwater Torch With Over Center Lever:
Automatic Pressure Kit Without Filler Cap:
Underwater Electric Ignitor:
2.5 Gallon Gasoline Tank With 100PSI Relief:
25ft Air Hose: